Page Text Content

en Rinse aid % As soon as the rinse-aid refill indicator h is lit on the fascia, there is still a rinse-aid reserve of 1 ­ 2 rinsing processes. Refill with rinse aid. The rinse aid is required for stain-free utensils and clear glasses. Use only rinse aid for domestic dishwashers. Combined detergents with rinse-aid component may be used up to a water hardness of 21° dH (37° fH, 26° Clarke, 3.7 mmol/l) only. If the water hardness is over 21° dH, rinse aid must be used. ­ Open the dispenser 1j by pressing and lifting the plate on the cover. Setting amount of rinse aid The amount of rinse aid can be set from : to : . Please set rinse aid on : to obtain very good drying results ( : is already set in factory). Change this setting, only if streaks (select lower setting) or water stains (select higher setting) are left on the utensils. ­ Close the door. ­ Switch on ON/OFF switch (. ­ Hold down programme button # and press START button P until : .... is indicated on the digital display. ­ Release both buttons. The LED for button # flashes and the digital display )" displays the factory setting : . ­ Press programme button # until the factory set value : is indicated on the digital display )". To change the setting: ­ Press programme button 3. Each time the button is pressed, the set value increases by one level; when the value of : has been reached, the display jumps back to : (off). ­ Press START button P. The set value is saved. ­ Carefully pour rinse aid up to the max. mark in the filler opening. Switching off rinse aid refill indicator If the rinse-aid refill indicator h is impaired (e.g. when using combined detergents containing rinse aid component), it can be switched off. ­ Proceed as described under "Setting amount of rinse aid" and set the value to : . The rinse aid refill indicator h is now switched off. PD[ ­ Close cover until it clicks shut. ­ To prevent excessive foam formation during the next rinse cycle, remove any rinse aid which has run over with a cloth. 8